Support & FAQs

Looking for an authorized DTA dealer? Click Here

Do any of my local dealers have your products in stock?
You can find a dealer near you by clicking on the link above. If there is not a dealer in your area you may place an order directly with us.

What barrel twists do you use?
SRS 338 LM 1 in 10
SRS 300 WIN 1 in 10
SRS 308 WIN 1 in 11
SRS 243 WIN 1 in 7.5

What is the muzzle thread pitch used for each caliber?
3/4x24 for all SRS calibers

Why doesn't the SRS 308 win have the standard 5/8x24 thread pitch?
We threaded all the calibers ¾x24 for two reasons, number one the larger thread creates a stiffer barrel enhancing accuracy, number two is the 3/4x24 pitch enables one to use .338 caliber silencers on all four caliber barrels, it is very effective and saves money. The ¾x24 thread pattern is large enough that customers can easily have their own gunsmith rethread their barrels down to 5/8x24 if they wish. We do not do custom threads so please don't ask.

Do you have plans for higher capacity magazines for the SRS?
Yes, one is in development and will be released in 2011.

Will there be any change on your zero after changing out the barrel?
Each barrel has its own zero so when changing from one caliber to another the zero will change, however when changing back to the original caliber it will return to the original zero. Click here to view test results of our barrel mounting systems return to zero ability.

What is the accuracy guarantee for the SRS?
1/2 MOA or better for three shots at 100 yards with qualifying match ammo

Is there any taper built into the picitanny rail?
No, however we make our own scope mounts which have MOA taper built into them. We offer rings for 30mm, 34mm, and 35mm tube sizes in 20, 30, and 40 MOA tapers.

How do I determine which taper to get in my scope mount?
Take your scopes total elevation travel and divide it by two. You will want the taper that is just under the result (example: 70 MOA/2 = 35 so the best choice is 30 MOA taper)
◊ 40 MOA taper (ideal for scopes with 80+ MOA of elevation adjustment, needed to shoot to 2000+ yards)
◊ 30 MOA taper (ideal for scopes with 65 - 75 MOA of elevation adjustment, needed to shoot to 1500+ yards)
◊ 20 MOA taper (ideal for scopes with less than 65 MOA of elevation adjustment, needed to shoot to 1000+ yards)

What is the height from the cheek weld to the center of the scope?
DT SRS 1.52"

Who makes the barrels?
We use Premium Match grade barrels from multiple reputable companies such as Krieger and Lother Walther.

What coatings are used on your products?
Black Oxide, Melonite, and Type III anodizing are all used on our products

Are the magazines proprietary?
Yes, our magazines utilize our patent pending shoulder retention feature which cradles the cartridge at the shoulder eliminating projectile impact against the front of the magazine during heavy recoil.

Does the SRS have a one or two stage trigger?
One stage trigger, however the trigger is fully adjustable for weight (1-6 lbs), adjustable for creep, and the triggers location can be adjusted.

What is the trigger weight?
The trigger weight is adjustable from 1 - 6 lbs.

Does the SRS have adjustable length of pull?
The SRS comes standard with three 1/2" spacers providing 1.5" of adjustable length of pull, more spacers can be added separately.

What is the internal magazines length?
DT SRS 338/300 magazine is 4"
DT SRS 308/243 magazine is 3"

What factory ammo is the most accurate in the SRS?
Excellent ammunition can be found from many manufacturers, however, we have found inconsistencies from lot to lot from even the best; therefor, we started Desert Tactical Munitions. Manufacturing our own ammunition not only ensures accurate ammunition, but also consistency from lot to lot.

Click here for more information about DTM's ammo line.

When loading my own 338 ammo what load is recommended?
Unfortunately we cannot make hand loading recommendations for liability reasons

What bore guide is recommended for the SRS?
Desert Tactical makes weapon specific bore guide for the SRS that is small enough to fit inside your pants pocket or field cleaning kit.

What scope is recommended for my SRS?
Any high quality scope as long as it has an objective lens of 56mm or less will work just fine with the SRS.

Can I get a custom caliber/barrel length?
We do not do any custom calibers or barrels, however Bobby Keigans at Freedom Gunworks offers custom caliber options. http://www.freedomgunworks.com/desert-tactical-arms/cat_16.html
(229) 200-8744

Can I single feed rounds into the rifle?
Optimum feeding reliability is accomplished from the magazine.